Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical box передч
3.3. Automatic transmission
3.3.1. General information
3.3.2. Hydrotransformer
3.3.3. Main transfer
3.3.4. Adjustment of a cable of the selector of switching of automatic transmission
3.3.5. Designation of the automatic transmission (AF 13-II)
3.3.6. Check of a condition of gearbox oil (AF13-II)
3.3.7. Check of pressure of oil (AF13-II)
3.3.8. Check of the position switch of the lever of gear shifting (AF13-II)
3.3.9. Unblocking of a stopper of the lever of gear shifting at violation of its work
3.3.10. Adjustment of the position switch of the lever of gear shifting (AF13-II)
3.3.11. Adjustment of hummock system of the drive of gear shifting (AF13-II)
3.3.12. Replacement of hummock system of the drive of gear shifting (AF13-II)
3.3.13. Replacement of the switch of lock adaptation of the lever of gear shifting
3.3.14. Replacement of a plait of wires in knot of the lever of gear shifting (AF13-II)
3.3.15. Replacement of the control unit of the electronic switch of the check point
3.3.16. Replacement of the glow lamp of the indicator of gear shifting in the console of the lever of gear shifting (AF 13-II)
3.4. Driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 





0653563c

3-3-13-zamena-vyklyuchatelya-stopornogo-prisposobleniya-rychaga-pereklyucheniya-peredach.html

3.3.13. Replacement of the switch of lock adaptation of the lever of gear shifting

Dismantle gear shifting lever knot.
Remove cable collars 3.
Remove a wire of the weight (shooter) from the grounding distributive block.
Disconnect the socket of a plait of wires 4 magnetic switches of lock adaptation of the lever of gear shifting 5.
2 remove a lock washer from the gear shifting lever console.
Wring out the contact switch of lock adaptation of the lever of gear shifting 1 from the gear shifting lever console.
Press the contact switch of lock adaptation of the lever of gear shifting 1 into the gear shifting lever console.

NOTE
Observe assembly situation.

Fix the contact switch of lock adaptation of the lever of gear shifting by new lock washers 2.
Attach the socket of a plait of wires 4 magnetic switches of lock adaptation of the lever of gear shifting 5.
Attach a wire of the weight (shooter) of the grounding distributive block.
Fix a plait of wires by means of a new cable collar 3.
Build in gear shifting lever knot.
Check functions of ensuring reliability of the lever of gear shifting.

"on the page back
3.3.12. Replacement of hummock system of the drive of gear shifting (AF13-II)
on the following page"
3.3.14. Replacement of a plait of wires in knot of the lever of gear shifting (AF13-II)