Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.2. Mechanical box передч
3.3. Automatic transmission
3.3.1. General information
3.3.2. Hydrotransformer
3.3.3. Main transfer
3.3.4. Adjustment of a cable of the selector of switching of automatic transmission
3.3.5. Designation of the automatic transmission (AF 13-II)
3.3.6. Check of a condition of gearbox oil (AF13-II)
3.3.7. Check of pressure of oil (AF13-II)
3.3.8. Check of the position switch of the lever of gear shifting (AF13-II)
3.3.9. Unblocking of a stopper of the lever of gear shifting at violation of its work
3.3.10. Adjustment of the position switch of the lever of gear shifting (AF13-II)
3.3.11. Adjustment of hummock system of the drive of gear shifting (AF13-II)
3.3.12. Replacement of hummock system of the drive of gear shifting (AF13-II)
3.3.13. Replacement of the switch of lock adaptation of the lever of gear shifting
3.3.14. Replacement of a plait of wires in knot of the lever of gear shifting (AF13-II)
3.3.15. Replacement of the control unit of the electronic switch of the check point
3.3.16. Replacement of the glow lamp of the indicator of gear shifting in the console of the lever of gear shifting (AF 13-II)
3.4. Driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 















0653563c

3-3-12-zamena-trosovojj-sistemy-privoda-pereklyucheniya-peredach-af13-ii.html

3.3.12. Replacement of hummock system of the drive of gear shifting (AF13-II)

Dismantle the average console.
To put cable channel 1 aside.
Unfasten cable channel.
Wring out from a control lever a cable of the drive of gear shifting 3.
Exempt a gear shifting drive cable from the holder.
Hook a lock clip the 2nd screw-driver.
Wring out (shooter) a gear shifting drive cable from a control lever on the position switch of the lever of gear shifting.
Exempt a gear shifting drive cable from an emphasis.
Hook a lock clip 1 screw-driver.
Delay a cable of the drive of gear shifting 3 from rubber consolidation 4 on the face panel.

NOTE
You watch that rubber consolidation did not descend from the face panel.

Insert from below via the face panel a cable of the drive of gear shifting 1 and as necessary lay it.
Moisten rubber consolidation 2 cables of the drive of gear shifting with soap solution.
Insert into an emphasis and fix in it a gear shifting drive cable.
Push a lock clip.

NOTE
You watch correctness of fixing.

Press (shooter) a gear shifting drive cable on a control lever of the position switch of the lever of gear shifting.
Press a cable of the drive of gear shifting 2 on the lever of gear shifting 3.
Insert a cable of the drive of gear shifting 2 in the holder in internal space of the car.
Fix by a lock clip 1.
Fix cable channel 4.
Install the average console.
Adjust hummock system of the drive of gear shifting.
Check functions of ensuring reliability of the lever of gear shifting.

"on the page back
3.3.11. Adjustment of hummock system of the drive of gear shifting (AF13-II)
on the following page"
3.3.13. Replacement of the switch of lock adaptation of the lever of gear shifting