Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
2.1. Petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
2.2. Mechanical part of petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
2.3. Cooling system
2.4. Lubrication system
2.5. System of injection
2.6. Petrol engines – the general procedures of check
2.7. Mechanical part of the engine
2.8. Test and repair operations of components of a mechanical part of the engine
2.9. Cooling system
2.10. System of injection of fuel of petrol engines
2.10.1. Removal and installation of fuel nozzles
2.10.2. Replacement of a fuel-supply line of high pressure (The pump of high pressure – the pressure chamber)
2.10.3. Module of the fuel pump
2.10.4. Replacement of the module of a dosage
2.10.5. Replacement of the regulator of pressure of fuel
2.10.6. Replacement of damping fuel return case
2.10.7. Replacement of the fuel level sensor
2.10.8. Fuel tank
2.10.9. Replacement of a tube of a jellied mouth of the fuel tank (petrol engines)
2.10.10. System of catching of vapors of fuel
2.10.11. Replacement of a forward ventilating tube
2.10.12. Removal and installation of container with absorbent carbon
2.10.13. Removal and installation of the sensor of a mass consumption of air
2.10.14. System of release (Z 14 XEP, Z 14 XEL, Z 16 XEP)
2.10.15. System of release (Z18 XE)
2.11. Lubrication system
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 















0653563c

2-10-4-zamena-modulya-dozirovki.html

2.10.4. Replacement of the module of a dosage

ATTENTION
During the work with fuel system pay attention to purity as, even the smallest particles of dirt can result in malfunctions in operation of the engine or fuel system.

Removal
Open a cowl.
Disconnect the rechargeable battery.
Disconnect connection with weight from a weight conclusion.

ATTENTION
The module of a dosage and area have to be cleared of jellied lubricant around.

ATTENTION
After removal, the module of a dosage and area have to be cleared around again.

Remove the dosage module.
Disconnect the socket of a plait of wires.
Turn off 3 bolts of fastening.

ATTENTION
Do not incline the dosage module.

Turn the module of a dosage and remove it holding horizontally.

Installation
Clear an opening and the condensed surfaces, using fabric without pile.
Install the new module of a dosage.
Cover consolidation with pure engine oil.
Install the dosage module horizontally and turn.
Tighten 3 bolts the moment of 6 N · m.
Fix the socket of a plait of wires.
Connect the rechargeable battery
Attach connection with weight to a weight conclusion.
Program volatile memory.
Close a cowl.

"on the page back
2.10.3. Module of the fuel pump
on the following page"
2.10.5. Replacement of the regulator of pressure of fuel