Repair of Opel Corsa C, from 2000 to 2005 release.
	1. Operation and maintenance of the car
	2. Engine
	3. Transmission
	4. Running gear
		4.1. General information
		4.2. Wheels and tires
		4.3. Running gear
		4.4. Forward suspension bracket
			4.4.1. Removal and installation of the stabilizer of the forward bridge
			4.4.2. Removal and installation of a rotary fist
			4.4.3. Removal and installation of the lever of an independent suspension bracket
			4.4.4. Replacement of all rubber bearings of the stabilizer
			4.4.5. Removal and installation of a depreciation rack with the shock-absorber
			4.4.6. Dismantling and assembly of a depreciation rack
		4.5. Back suspension bracket
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Schemes of electric equipment

4-4-3-snyatie-i-ustanovka-rychaga-nezavisimojj-podveski.html

4.4.3. Removal and installation of the lever of an independent suspension bracket

Removal

Remove a forward wheel.

Note situation concerning a wheel nave.

Remove the directing hinge from a rotary fist.

Unscrew the screw 1.

Remove the lever of an independent suspension bracket from the case of the forward bridge ahead and behind.

Unscrew the screw with a nut 3.

Unscrew the screw 2.

Installation

Install the lever of an independent suspension bracket on the case of the forward bridge ahead and behind.

Freely twirl the screw with a nut.

Freely twirl the screw 2.

Install the directing hinge on a rotary fist.

Tighten a new nut of 60 N · m.

Fix the lever of an independent suspension bracket on the case of the forward bridge ahead and behind.

Tighten the screw with a nut of 3 90 N · m + 75 ° +15 °.

Freely tighten the screw 2 90 N · m + 75 ° + 15 °.

Establish a forward wheel.