Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. General procedures of check
6.3. Operations of adjustment and replacement of elements of the brake system
6.3.1. Adjustment of the parking brake system
6.3.2. Removal and installation of forward brake hoses
6.3.3. Replacement of tubes of the brake system
6.3.4. Removal and installation of an overlay of brake shoes of a forward wheel
6.3.5. Removal and installation of the protection cover of a brake of a forward wheel
6.3.6. Replacement of a brake disk of a forward wheel
6.3.7. Removal and installation of a brake board of a back wheel
6.3.8. Removal and installation of brake shoes of a back wheel
6.4. Anti-blocking system (ABS 8.0 and ABS 8.0 ESP)
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 















0653563c

6-3-6-zamena-tormoznogo-diska-perednego-kolesa.html

6.3.6. Replacement of a brake disk of a forward wheel

NOTE
Generally, always replace both brake disks on one axis.

Removal
Remove a forward wheel.
Release a brake hose from fastening on a spring rack.
Disconnect a clamping level of a brake hose.
Extend a brake hose from fastening.
Disconnect bolts of fastening of a guide of blocks from a rotary fist.
Remove a brake support from a guide of blocks and suspend it on a spring rack.
Turn off tightening a bolt.
Remove a brake disk.

Installation
Clear the interfaced surfaces of a brake disk and a nave of a wheel.

NOTE
Make sure that the surfaces of contact are not deformed and have no zadir.

Attach a brake disk to a nave of a forward wheel the screw tighten the moment 7 N · m.
Attach a guide of blocks to a rotary fist with a brake support and overlays of brake shoes tighten the moment 100 N · m.

NOTE
Clear a carving and establish bolts with the fixing structure.

Attach a brake hose to a spring rack.
Attach a brake hose to fastening.
Establish a clamping level.
Establish 2 forward wheels and tighten the moment 110 N · m.

"on the page back
6.3.5. Removal and installation of the protection cover of a brake of a forward wheel
on the following page"
6.3.7. Removal and installation of a brake board of a back wheel