Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
4.1. General information
4.2. Wheels and tires
4.3. Running gear
4.4. Forward suspension bracket
4.5. Back suspension bracket
4.5.1. Check of an angular gap of knot of the wheel bearing
4.5.2. Removal and installation of the back bridge
4.5.3. Removal and installation of the stabilizer
4.5.4. Removal and installation of the back shock-absorber
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 















0653563c

4-5-1-proverka-uglovogo-zazora-uzla-kolesnogo-podshipnika.html

4.5.1. Check of an angular gap of knot of the wheel bearing

Remove a brake disk of a back brake.
Install KM-468-B 2 or KM-6610 adaptation with two wheel bolts 1 on a nave of a wheel of knot of the wheel bearing.
Install MKM-571-B 3 adaptation with a magnetic paw 4 on the back bridge.

NOTE
To install the measuring probe of the arrow indicator (shooter) on the outer edge of a circle of openings on a drum nave.

Check a gap, having a little wrung out KM-468-B or KM-6610 adaptation.
Admissible angular gap max.: 0,1 mm.

NOTE
At excess of this size the knot of the wheel bearing needs to be replaced with I.

Remove MKM-571-B 1 adaptation with a magnetic paw 3.
Remove KM-468-B 2 or KM-6610 adaptation from a wheel bearing knot wheel nave.
Establish a brake disk of a back brake.

"on the page back
4.5. Back suspension bracket
on the following page"
4.5.2. Removal and installation of the back bridge