Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
3.1. Coupling
3.1.1. General information
3.1.2. Pumping of the hydraulic drive of coupling (the transmission – F13/F17+/F23)
3.1.3. Removal, check and installation of a persistent plate and the conducted clutch plate (without SAC)
3.1.4. Replacement of a pedal of coupling
3.2. Mechanical box передч
3.3. Automatic transmission
3.4. Driving mechanism
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 















0653563c

3-1-4-zamena-pedali-scepleniya.html

3.1.4. Replacement of a pedal of coupling

Removal
Remove facing of a steering column.
Remove light switch.
Press light switch at the left, turn clockwise and remove it.
Remove the lower overlay of the dashboard, having turned off 4 bolts of fastening.
Disconnect the operating coupling switch.
Disconnect a returnable spring from a coupling pedal
Disconnect a coupling pedal from the main cylinder of coupling.
Unbend the screw-driver up and disconnect a clamping level.
Turn off a pedal bolt.
Disconnect a pedal support from a cross-piece.
On cars with the left arrangement of steering turn off 2 bolts of fastening.
On cars with the right arrangement of steering turn off a fastening nut.
Disconnect a pedal support from the main cylinder of coupling, having turned off 2 nuts of fastening.
Move back main cylinder of coupling.

NOTE
Do not damage plaits of wires and the attached elements.

Remove a pedal support accurately assembled with a coupling pedal.

Installation
Establish a pedal support with a coupling pedal.

NOTE
At installation use new bolts.

Attach a pedal support to a cross-piece, having tightened 2 nuts of fastening the moment of 20 N · m.

NOTE
Use new nuts.

Attach a coupling pedal to the main cylinder of coupling.
Attach a clamping level.

NOTE
Use a new clamping level.

Attach a returnable spring to a coupling pedal.
Attach the operating coupling switch.
Establish the lower overlay of the dashboard.
Install the switch of light and turn counterclockwise.
Establish a casing of a steering column.


"on the page back
3.1.3. Removal, check and installation of a persistent plate and the conducted clutch plate (without SAC)
on the following page"
3.2. Mechanical box передч