Repair of Opel Corsa C, from 2000 to 2005 release.
	1. Operation and maintenance of the car
	2. Engine
		2.1. Petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
		2.2. Mechanical part of petrol Z10XE, Z10XEP, Z12XE, Z12XEP DOHC-I engines
		2.3. Cooling system
		2.4. Lubrication system
		2.5. System of injection
		2.6. Petrol engines – the general procedures of check
		2.7. Mechanical part of the engine
		2.8. Test and repair operations of components of a mechanical part of the engine
		2.9. Cooling system
			2.9.1. Filling and removal of air from the cooling system
			2.9.2. Check of tightness of the cooling system
			2.9.3. Removal and installation of the pump of cooling liquid
			2.9.4. Replacement of an intermediate cooler
		2.10. System of injection of fuel of petrol engines
		2.11. Lubrication system
	3. Transmission
	4. Running gear
	5. Steering mechanism
	6. Brake system
	7. Onboard electric equipment
	8. Body
	9. Schemes of electric equipment

2-9-2-proverka-germetichnosti-sistemy-okhlazhdeniya.html

2.9.2. Check of tightness of the cooling system

Check

Open a cowl.

NOTE

Before the procedure of check warm up the engine up to the working temperature (oil temperature – 80 °C).

Check the level of cooling liquid and modify in case of need.

Install the KM adapter 471 and the test equipment for a radiator, on a broad tank (follow instructions of the manufacturer).

Create pressure about 100 kPa (1 bar) in the cooling system.

Remove the test equipment and close a broad tank.

Close a cowl.