Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
1.1. Description of the car
1.2. Keys, locks of doors, the opening body elements
1.3. Governing bodies, combination of devices, light and sound alarm system
1.4. Seats
1.5. System of passive safety
1.6. Heating and air conditioning
1.6.1. A heating system and ventilation with the additional conditioner
1.6.2. Climate control
1.6.3. Conditioner
1.6.4. Heating of seats
1.6.5. Inclusion signaling devices in keys
1.6.6. Management of climate control
1.6.7. Air inlet
1.7. Driving and service of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 





0653563c

1-6-6-upravlenie-klimat-kontrolem.html

1.6.6. Management of climate control

Provides the maximum comfort under any weather conditions and external temperature at all seasons of the year.
To provide constant and cozy climate in the car, automatic adjustment of temperature of the arriving air, and also an expense and distribution of air depending on external atmospheric conditions is made.
Automatic compensation of changes of temperature due to external influences, for example, of sunshine is carried out.
At the included cooling (the conditioner compressor) cooling and drainage of air is made.
If cooling or drainage is not required, for economy of fuel press the ESO key.
In the automatic mode climate control provides maintenance of optimum parameters practically in any conditions. If necessary settings of climate control can be configured manually.
Functions kpimat-kontropya are in full available only at the working engine.
At low external temperatures cooling (the conditioner compressor) is automatically switched off.

Automatic mode
Initial installation for the maximum comfort:
– press the AUTO key;
– open all nozzles of an obduv;
– turn on the conditioner compressor;
– by means of the regulator previously establish temperature on 22 °C.
If necessary the set temperature can be established on higher or lower value.
At shutdown of the compressor of the conditioner (on the display the inscription "ESO" will be displayed) the level of comfort and safety can go down.
All nozzles of an obduv in the automatic mode are regulated automatically therefore they have to be constantly open.

The set temperature
The set temperature it is possible establish by means of the left regulator on values from 16 °C to 28 °C.
For reasons of comfort change the set temperature only to small values.
At installation of temperature below 16 °C on the indicator of the conditioner "LO" is displayed: climate control constantly works with the maximum power of cooling; regulation of temperature is not made.
At installation of temperature higher than 28 "With on the indicator of the conditioner "HI" is displayed: climate control constantly works with the maximum power of heating; regulation of temperature is not made.
Installation of the set temperature after switching off of ignition remains written down in memory.

Installations manually
In special circumstances (for example, when frosting or fogging glasses) settings of climate control can be configured manually.
The installations executed manually after switching off of ignition remain written down in memory.

Removal of moisture and hoarfrost from glasses
Press a key, on the indicator of the conditioner the badge will appear.

ATTENTION
Non-compliance with the specified rules can lead to fogging of glasses and accidents as a result of deterioration in visibility.

Temperature, distribution of air and having blown automatically are established so that quickly to defreeze and dry up glasses.
Return to the automatic mode: press a key or the AUTO key.

Heating of back glass, heating of external mirrors
Press a key on the indicator of the conditioner the badge will appear.

NOTE
Heating works only at the working engine.

Back glass and external mirrors are quickly exempted from hoarfrost and moisture.
Heating is automatically turned off approximately in 15 min. For premature shutdown: repeatedly press a key.

Inclusion and switching off of the compressor of the conditioner
Press the ESO key, on the indicator of the conditioner the ESO badge will appear.
The mode for fuel economy. In this mode cooling (the conditioner compressor) is switched off.
Cooling and removal of moisture from the arriving air is not made, at the expense of it the comfort provided with climate control is limited. It can lead, for example, to fogging of glasses.
For return to an operating mode with cooling press the ESO key, the lamp on the indicator dies away.

Air distribution
Press one or several following keys, on the indicator of the conditioner the corresponding symbol appears:
: distribution of air to a windshield and to forward side glasses.
: distribution of air to passengers of the car through adjustable nozzles of an obduv.
: distribution of air in the lower space of salon.
Return to the automatic mode: repeatedly press the corresponding keys or the AUTO key.

Air consumption
The consumption of air is regulated by the right regulator. The established force of an obduv is shown columns.
For switching off of an obduv and together with it climate control turn the right regulator to the left until the indicator goes out.
For inclusion turn the regulator to the right.
For return to the automatic mode press the AUTO key.

Air circulation mode
The system of air circulation prevents penetration of external air into salon, at the same time pumping of internal air of salon is made.
Press a key on the indicator of the conditioner the badge will appear.
In the air circulation mode air exchange is limited. Quality of air in salon worsens over time, it can lead to the fatigue phenomena at passengers. Without cooling humidity of air increases in the mode, fogging of glasses is possible. Therefore include the mode of air circulation only for a short time.
For switching off of the mode of air circulation repeatedly press a key.

Air conditioning at the idle engine
At the standing car and the switched-off ignition it is possible to use still heats or, respectively, cold which are available in system for air conditioning in salon, for example, at a stop before the railway crossing.
For this purpose press the AUTO key at the switched-off ignition, the set temperature appears on the conditioner indicator. Temperature is regulated by the left regulator.
Duration of air conditioning is limited.
For the premature termination press the AUTO key.

"on the page back
1.6.5. Inclusion signaling devices in keys
on the following page"
1.6.7. Air inlet