Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
7. Onboard electric equipment
7.1. System of power supply
7.2. System of lighting
7.2.1. Check and adjustment of headlights, external lighting, lamp of salon, switch of headlights
7.2.2. Adjustment of fog lights
7.2.3. Removal and installation of headlights
7.2.4. Removal and installation of back fog lights
7.2.5. Replacement of the glow lamp of driving beam
7.2.6. Replacement of the glow lamp of passing beam
7.2.7. Replacement of the glow lamp of xenon headlights
7.2.8. amine of the glow lamp of the index of turn (xenon headlight)
7.2.9. Removal and installation of a starter of a xenon lamp
7.2.10. Replacement of a lamp of driving beam / lamp of parking fires (xenon headlight)
7.2.11. Replacement of the glow lamp / lighting lamp of a luggage carrier or luggage compartment
7.2.12. Removal and installation of illumination of registration plate / glow lamp
7.2.13. Removal and installation of the switch of a control lamp of the parking brake
7.2.14. Replacement of the forward lamp of salons / glow lamps
7.2.15. Removal and installation of the back lamp of the salon / glow lamp
7.2.16. Removal and installation of the lighter / glow lamp
7.3. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 















0653563c

7-2-7-zamena-lampy-nakalivaniya-ksenonovykh-far.html

7.2.7. Replacement of the glow lamp of xenon headlights

Removal

ATTENTION
It is impossible to touch elements of xenon passing beam at the turned-on passing beam. Switch off ignition and the switch of light.
The central socket of a plait of wires of headlights has to be disconnected.

Dismantle headlights.
Dismantle the module of ignition of a xenon headlight.
Unblock and remove a zashchiny cap of a xenon headlight.
Unscrew the puskoreguliruyushchy device of a xenon lamp 1.
Dismantle a xenon lamp 3kh unscrew the screw from a lock ring 1.
Remove a lock ring.
Remove a xenon lamp 2.

Installation
Establish a xenon lamp.

NOTE
Pay attention to coding.

Insert a lock ring, tighten the screw of a lock ring. OPEL CORSA 2427
Install the module of ignition of a xenon headlight.
Connect the puskoreguliruyushchy device of a xenon lamp and record.
Establish a protective cap of a xenon lamp.
Adjust headlights.
Carry out an inspection of work of lamps.

"on the page back
7.2.6. Replacement of the glow lamp of passing beam
on the following page"
7.2.8. amine of the glow lamp of the index of turn (xenon headlight)