Repair of Opel Corsa C, from 2000 to 2005 release.
1. Operation and maintenance of the car
2. Engine
3. Transmission
4. Running gear
5. Steering mechanism
6. Brake system
6.1. General information
6.2. General procedures of check
6.2.1. Check and adjustment of elements of the brake system
6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system
6.2.3. Removal of air from a hydraulic actuator of the working brake system
6.2.4. Brake hoses
6.3. Operations of adjustment and replacement of elements of the brake system
6.4. Anti-blocking system (ABS 8.0 and ABS 8.0 ESP)
7. Onboard electric equipment
8. Body
9. Schemes of electric equipment
 















0653563c

6-2-2-proverka-urovnya-tormoznojj-zhidkosti-v-bachke-gidroprivoda-rabochejj-tormoznojj-sistemy.html

6.2.2. Check of level of brake fluid in a tank of a hydraulic actuator of the working brake system

The tank for brake fluid is located in a motor compartment.
The tank has the transparent case therefore the level of brake fluid can be controlled outside.
Level of brake fluid has to be always closer to a tag "MOVE".
If the level of brake fluid too low, before removal of a stopper from a compensation tank pure rags wipe a stopper and the place about a stopper from pollution to exclude their hit in a hydraulic contour of brakes.
Add the recommended brake fluid in a tank. Mixing of various types of brake fluid can damage hydraulic system.

"on the page back
6.2.1. Check and adjustment of elements of the brake system
on the following page"
6.2.3. Removal of air from a hydraulic actuator of the working brake system