1.2.9. Window regulators
Be careful at the address with electronic control by window regulators and a sliding roof with the electric drive.
When closing windows and a sliding roof surely watch the site of closing. Make sure of lack of objects which can be clamped.
Before an exit from the car take out the ignition key to allow the allowed use of the car.
Windows of doors are involved by rotary handles.
For opening of rotary glass behind press the cranked lever. For closing – pull and fix the cranked lever.
Electronic control by window regulators
Management of glasses in the doorway of the driver and the forward passenger is carried out by two keys on the handle of a door of the driver. The additional key is located on the handle of a door of the forward passenger.
Signaling devices in toggle-switches show functional readiness.
For a stage-by-stage zadeystviye quickly press a key of the corresponding window. For automatic opening or closing press a key longer time, for a movement stop repeatedly quickly press a key.
In case of resistance during automatic closing of glass above the middle of a window the movement instantly stops, and the window will open again.
In case of the hard course, for example, owing to hoarfrost availability consistently press a key of the corresponding window until the window step by step is closed.
Closing of windows outside
On cars with electronic control by window regulators of glass of forward doors it is possible to close outside: holding pressed a key on the device of remote control until glasses are not closed.
At too frequent repeated influence power supply of management of window regulators for some time is disconnected.
The system is protected by safety locks in a box a safety lock.
If opening and closing of windows is impossible, the electronic control system of window regulators needs to be made active in the way described below.
1. Close doors.
2. Include ignition.
3. Completely open windows.
4. Close a window and hold a switch key in the pressed situation not less than 5 pages.
5. Repeat the procedure for each window.